Just how do you really feel about Hot Water Heater Repair?
Many modern homes make use of an electric water heater for their heating system, due to its convenience and ease of use. Nonetheless, similar to any other electric devices, issues might occur with its usage, unexpectedly. It can be really irritating to awaken to a cool shower as opposed to a warm one or having your bath with water that isn't hot sufficient or even also warm. Whatever the situation may be, water heater problems can be fairly aggravating. Luckily, we've made a list of possible remedies to your hot water heater problems. There are a number of factors that can create much of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you turn off the major power supply for safety and security. Whatever the trouble is, getting it dealt with need to not present too much of an issue if you adhere to these actions:
Inspect Your Power Supply:
As fundamental as this may appear, it is extremely required. Without adequate power, your water heater will not operate. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the concern, just turn it on and off once again. Replace any busted or worn-out fuse. Test the device with power after these modifications to see if it's now functioning.
Inspect the Burner in the Hot Water Heater:
If it's not a power problem, after that attempt having a look at your heating element if it is still functioning. Evaluate each of your heating elements to ensure the issue isn't with any of them. If any one of them is defective, change that component and then examine whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to check the temperature level settings on your top thermostat. Guarantee the breaker is switched off before doing anything. Open up the access panel and also press the red button for temperature level reset above the thermostat. This need to assist warm the water. Turn the breaker back on and inspect if the trouble has been solved.
Call A Professional:
If after changing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you might need to call an expert plumber for an expert point of view. The trouble with your heater could be that the cold and hot faucets have been changed or it might be undersized for the amount of hot water required in your home. Whatever the situation might be, a specialist plumber would assist address the problem.
Conclusion
Hot water heater troubles are not always major. A number of them result from minor issues like a blown fuse or worn-out burner. Changing the faulty parts ought to suffice. Nonetheless, if you are still unable to resolve the issue, give a call to your nearby plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our section on No Hot Water — Water Heater Repair. Thanks so much for spending some time to read through our piece of content. Are you aware of somebody who is intrigued by the topic? Do not hesitate to promote it. Thanks so much for taking the time to read it.
Call Us Now